Configuring the Meraki MX series for use with Secure Edge

NAVIGATION  Partner Portal > Networking Status > Network Manager > Manage > Secure Edge > Service Settings

This article explains how to create an IPSEC configuration between Secure Edge and your Meraki MX series appliance.

Procedure

  1. Navigate to portal.dattobackup.com

  2. Log in with your Partner Portal credentials.

  3. From the header menu, select Status > Networking Status.

  1. Select the name of a Network or Launch Network Manager, to load the Networking Manager.

  1. From the left navigation menu, select Secure Edge to expand the options available.

  1. From the left navigation menu, select Service Settings.

  2. The Service Settings page loads.

  3. Mirror your Cloud Gateway and Corporate Tunnel settings to those of your Meraki device.

  1. Ensure that the Phase 1 and Phase 2 settings of your Meraki and your Secure Edge appliance also match.

  1. Save your changes. Your Meraki and Secure Edge appliances should now be in an IPSEC configuration.