AP62 Access Point hardware and specifications

Topic

This article provides the feature and hardware specifications for the Datto Networking AP62 access point.

Environment

• Datto Networking AP62 Access Point

Description

Form factor

Figure 1: Top view of the AP62

Specifications

Wireless connectivity	802.11a/b/g/n/ac Wave 2 2.4 GHz 2x2, Dual 5 GHz 2x2 MU-MIMO
Bands	2.4 GHz + 5 GHz + 5 GHz
Speed (rated)	2 Gbps 2.4 GHz - 300 Mbps 5 GHz - 867 Mbps 5 GHz - 867 Mbps
Range (approximate)	75' - 150' indoor (3-4 walls) 400' - 600' outdoor
Max users (recommended)	75-150 per AP
Cloud Management	Built-in cloud management (no onsite controller/management appliance required), WPA/WPA2 Personal and Enterprise, captive portal/splash pages, user management capabilities, etc.
Automatic Firmware Upgrades	Yes
Automatic Feature Upgrades (future-proofing)	Yes
Zero config plug and play	Yes
Self-forming, self-healing Mesh	Yes
Seamless roaming	Yes
Wireless LAN	4 SSIDs, bridge to LAN, bridge to VLAN (tagging), Public & Private SSIDs
Mounting	Installation kit included: t-rail ceiling, solid ceiling or wall, Ethernet jack, outdoor wall/pole
Ethernet/LAN	2 x Gigabit
PoE	Standard 802.3af/at, Passive 18-24V (mode A, B, A+B) *802.3at recommended
CPU	Qualcomm Dakota IPQ4019
Memory	256MB DRAM DDR3
LED Indicators	Nine-color LED status indication
Hardware watchdog	Yes
Antennas	INTERNAL: 2 dual-band, 2 single-band
USB	Yes
Idle Power Consumption	5.5W
Indoor/Outdoor Rating	CE Marked for Indoor/Outdoor Use
Certifications	EN 60950-1, EN 55032, EN 62311 (SAR & MPE), UL 60950-1, cUL 60950-1, EN 300.328, EN 301.489-1 and EN 301.489-17, EN 301.893, RCM , C-Tick 4268(2.4GHz) +C-Tick 4268 (5GHz), C-Tick 3548, ICES-003, IC RSS-247(2.4GHz) + IC RSS-246(5GHz), FCC Pat 15 B, C, E
Operating Temperature	-20° to 50° C
Size	6.69” x 6.69” x 1.2”
Weight	1.434 lbs

Port Legend

The AP62 has two Ethernet ports:

• Port 1: Use this port to connect to 802.3af Power over Ethernet (PoE) only.
• Port 2: Use this port to connect to 18-24v passive Power over Ethernet, or to hard-wire a connection between a computer and the access point's SSID.

Figure 2: AP62 Ethernet ports