Firmware upgrade paths for AP42, AP62, and Legacy Access Points
Topic
This article explains firmware upgrade paths for Datto AP42, AP62, and Legacy access points.
Environment
-
Datto AP42 Access Points
-
Datto AP62 Access Points
-
Legacy Access Points
Description
In the AP42, AP62, and Legacy APs firmware drop-down, firmware versions 7.0.8 and higher are only available for AP42 and AP62. Legacy access points will not receive an update to firmware versions 7.0.8 or higher.
Use the table below to determine the version to which your access point will upgrade based on the model, original firmware, and selected firmware upgrade version.
| Model | Original firmware | Selected firmware | Will upgrade to |
|---|---|---|---|
|
AP42 |
6.5.3 |
7.0.8 |
7.0.8 |
|
AP42 |
6.5.3 |
6.4.15 |
6.4.15 |
|
AP42 |
6.4.15 |
6.4.15 |
6.4.15- no change |
|
AP42 |
6.4.15 |
7.0.8 |
7.0.8 |
|
AP62 |
6.5.3 |
7.0.8 |
7.0.8 |
|
AP62 |
6.5.3 |
6.4.15 |
6.4.15 |
|
AP62 |
6.4.15 |
6.4.15 |
6.4.15- no change |
|
AP62 |
6.4.15 |
7.0.8 |
7.0.8 |
|
Legacy AP |
6.4.15 |
7.0.8 |
6.4.15- no change |
|
Legacy AP |
6.5.3 |
7.0.8 |
6.5.3 - no change |
|
Legacy AP |
Other |
7.0.8 |
Other- no change |
|
Legacy AP |
6.4.15 |
6.4.15 |
6.4.15- no change |
|
Legacy AP |
Other |
6.4.15 |
6.4.15 |
