Datto Networking App: WiFi

Topic

This article describes the Datto Networking App's WiFi page.

Environment

  • Datto Networking App

Description

The WiFi page lets you configure the SSIDs on access points connected to a Datto network. Tap a network from the list, then tap WIFI to view configurable SSIDs.

mceclip2.png
Figure 1: The WiFi page

Viewing SSID settings

Tap an SSID to see its current settings.

mceclip1.pngFigure 2: View SSID settings

Configuring SSIDs

Tap the SSID you wish to modify, then tap the pencil icon in the upper right-hand corner of the screen. The following configurable options will appear:

  • SSID Name: Change the name of the SSID
  • Use Access Point Name: Toggle Yes or No to use the name of the access point instead of a separate SSID name
  • Enabled: Enable or disable the SSID
  • Visible: Make the SSID visible to clients
  • Band: Choose between the 2.4 GHz band, 5 GHz band, or both
  • Authentication: Enable or disable authentication on the SSID
  • Authentication type: Choose between WPA Pre-shared key or WPA Enterprise authentication; options will change based on the authentication type selected
  • WPA2-only: Choose WPA2 authentication
  • WPA password: Set the password for WPA authentication

mceclip4.png
Figure 3: Edit SSID settings