Legacy Open Mesh: Required Firmware Update For Open Mesh Networking Switches
Topic
This article provides details about a critical update required for Open Mesh Networking Switches running firmware older than version 1.03.24.
Environment
- Open Mesh Switches
Description
Open Mesh switches running firmware earlier than 1.03.24 have certificates which expire in May 2019. After expiration, these switches will no longer check in, preventing device management, reporting, and automatic upgrades. To avoid this, you must upgrade your switches to firmware version 1.03.24.
Upgrade procedure
Switches running firmware between 1.03.07 - 1.03.19
1. Navigate to Configure ? Maintenance and toggle Automatic Upgrades to on. Once this is enabled, switches on the network will update to the current stable firmware release during the specified maintenance window. To avoid future disruption, and to receive the latest features and bug fixes, leave automatic upgrades enabled at all times.
2. You can also click the Upgrade Now button to immediately start the upgrade.
If a switch fails to upgrade despite enabling automatic upgrades, reboot it and wait for the maintenance window or click the Upgrade Now button again.
Figure 1: The CloudTrax UI Maintenance page
Switches running firmware earlier than 1.03.07
These switches cannot check into Open Mesh ClouTrax due to an already expired certificate, so they will require a manual firmware flash. Be sure to bring undeployed switches online to verify they are upgraded to the latest firmware and can check into Open Mesh Networking Technical Support.
Questions / feedback
As always, if you have any concerns or questions, please contact Open Mesh Technical Support: support@openmesh.com