Managed Power: Features & Specifications (US & Canada)

Topic

This article provides the hardware specifications for the US and Canada based Managed Power Devices.

Environment

  • DMP-PDU-6R-515
  • DMP-PDU-14R-515

Description

Device Layout

Below is the layout of the DMP-PDU-6R-515 model. The DMP-PDU-14R-515 is taller with 14 ports instead of the 6 shown.

Technical Specifications

    DMP-PDU-6R-515 DMP-PDU-14R-515
Input Nominal Input Voltage 100-120V 100-120V
Derated Maximum Input current 12A 12A
Input Frequency 50-60 Hz 50-60 Hz
AC Input Connection 12A(1) IEC C-14 (1) IEC C-14
Output Nominal Output Voltage 100~120V 100~120V
Frequency Compatibility 50-60 Hz 50-60 Hz
Output Receptacles (14) NEMA 5-15R (14) NEMA 5-15R
Overload Protection 15A 15A
Maximum Capacity 1440W 1440W
Surge Protection Surge Suppression Energy Rating (8/20 uS) 1080J 3240J
Protection Modes Full Normal Mode (L-N) Common Modes (N-G & L-G) Full Normal Mode (L-N) Common Modes (N-G & L-G)
Maximum Continuous Operating Voltage 150V 150V
Voltage Protection Rating (VPR) 500V 500V
Interfaces Ethernet Port
  • (2) 10/100/1000Mbps RJ45
  • (1) Uplink Port
  • (1) Network Pass-Through Port
  • (2) 10/100/1000Mbps RJ45
  • (1) Uplink Port
  • (1) Network Pass-Through Port
Resest Button (1) Recessed button (1) Recessed button
Power Button (1) Backlit Power Button (1) Backlit Power Button
LCD Display 1.3” display for visualizing power information 1.3” display for visualizing power information
Navigation Buttons (2) Buttons for navigating display (2) Buttons for navigating display
LED Indicators Power - -
Protected Green Green
Grounded Green Green
Outlet Green per Outlet Green per Outlet
Ethernet Activity/Link Activity/Link
Main Component Metering IC Prolific PL7413 Prolific PL7413
CPU Airoha EN7562 Airoha EN7562
Flash Size 128MB SPI 128MB SPI
Memory Size 256MB DDR3 256MB DDR3
Physical Properties Dimensions (H x W x D) 1.73” x 17.32” x 2.75” (44 x 440 x 70 mm) 3.46” x 17.32” x 3.46” (88 x 440 x 88 mm)
Form Factors Supported
  • Rackmount- Horizontal(1U) [Reversible]
  • Rackmount -Vertical(0U)
  • Wall Mount - Horizontal/Vertical
  • Desktop
  • Horizontal(2U) [Reversible]
  • Wall Mount - Horizontal/Vertical
  • Desktop
Included Accessories
  • (1) 9ft IEC C13 Power Cable, regional male plug
  • (2) Short Rack/Wall Brackets
  • (2) Deep Rack Brackets
  • (8) Bracket Screws
  • (4) Wall Mounting Screws
  • (4) Drywall Anchors Mounting
  • (4) Rubber Feet
  • (1) 9ft IEC C13 Power Cable, regional male plug
  • (2) Short Rack/Wall Brackets
  • (2) Deep Rack Brackets
  • (8) Bracket Screws
  • (4) Wall Mounting Screws
  • (4) Drywall Anchors Mounting
  • (4) Rubber Feet
  • (1) Retention Clip
Weight 2.58 lb (1.17 kg) 6.55 lb (2.97 kg)
Environmental Operating Temperature 0’C to 50’C (32*F to 122*F) 0’C to 50’C (32*F to 122*F)
Storage Temperature -30’C to 70’C (-22*F to 158*F) -30’C to 70’C (-22*F to 158*F)
Humidity 5%-95% non-condensing 5%-95% non-condensing
Safety Regulation Power Distribution Unit (PDU) UL 62368-1 + CSA C22.2 no. 62368-1
UL1449 ed5
UL 62368-1 + CSA C22.2 no. 62368-1
UL1449 ed5
EMC Emissions (USA, Canada) FCC Part 15 Subpart B / ICES-003 Issue 7 (Class B)
IEC 61000-4-2
FCC Part 15 Subpart B / ICES-003 Issue 7 (Class B)
IEC 61000-4-2
ESD Protection Contact: Level 3 Air: Level 3 Contact: Level 3 Air: Level 3
Surge Protection 0’C to 50’C (32*F to 122*F) 0’C to 50’C (32*F to 122*F)

Product Operation

  • As a safety measure, any port measuring 15A or higher will disable itself. Ports can be re-enabled by logging in to the Datto Network Manager and managing the port settings for that power strip.
  • The main plug or appliance coupler acts as the disconnecting device.
  • Do not place the device in a spot where it is difficult to disconnect the main plug or appliance coupler.
  • The pinhole reset will reset the device's CPU and NIC; it will not disconnect power to the outlets.
  • The soft switch will disable power to the outlets.
  • Clean only with a dry cloth.

Additional Resources